What's involved in a vehicle wrap?
Typically there are three steps to a vehicle wrap being completed. The first step is to decide on a design, this will take place between the design team and the client to ensure the satisfaction of the client. The second step is to send the layout/ design to printing and have it printed. Step three is installation. There could be a step four if you will want us to remove the wrap once you are finished advertising.

Do we create the design for you?
Either way is fine. If you would like to design your own and bring it to us that will be fine. If you would like to leave that all up to us, we have a designated design team that can work with you to create the perfect your design. Remember its all about the design!

How is the wrap installed?
The wrap is installed in a completely controlled environment. It is possible to complete a wrap outside, but for the best results it is best to have the certified installers complete the wrap in their typical controlled environment. Wind, rain and debris can all play a large factor in the success and longevity of your wrap.

Will my vehicle have paint damage when the graphics are removed?
If the factory paint is in good condition at the time of application, there will be no damage to the paint. In fact it will protect your factory paint job! If the vehicle has paint that is oxidized, cracked, peeling or has been repainted due to age or accident, the paint may damage upon removal.

How long should I expect the wrap to last?
With the proper care the wrap should last between 3-4 years. Depending on conditions the wrap could last up to 5-7 years.

How do I properly care for my wrap?
Wash with soap and water using a sponge to clean with, no pressure washing or the use of an ice scrapper.

Can you wrap anything other than a vehicle, RV or Bus?
We can wrap anything that the adhesive is capable of sticking too. Most hard services.

Do I need to do anything to my car before I bring it in to be wrapped
Please bring your car to us freshly washed, completely clean.

How long will you need my car for installation
Installion typically does not take anymore than two (2) days. We typically turn most vehicles around in one (1) day.

Paint protection FAQ

Is the film visible?
Venture Shield Paint Protection Film is 99.5% clear, so it is virtually invisible.

What areas of the vehicle can be protected?
Hood, Fenders, Painted mirrors, bumpers, rocker panels, headlights, door cups and door edgeguards.

What is it made out of?
Adhesive, Urethane and Clearcoat.

How thick is it?
8 mils. about three (3) pieces of paper

How do you cut the film?
A plotter to pre-cut our film. No blades or knives are used to cut patterns from scratch on your vehicle.

Does this have a clear coat on it?
Yes.

Can I take it through a car wash or wax it?
Yes, just no harsh polish or wax.

Can it be removed?
Yes, it can and without damaging your paint in any way.

What is covered in your Warranty?
A. Lifetime Warranty covering yellowing, bubbling, misapplication and cracking.

Will my paint fade differently under the shield than on the rest of my vehicle?
A. No, Venture Shield allows UV rays to penetrate.

How long does it take to install?
A. Between 3-5 hours depending the model of your vehicle and the kit you choose.